How To Grow Salvia Divinorum

Salvia divinorum from homegrown sources offers the most amazing experience. Of course, you can purchase high quality salvia divinorum online and at herbal shops, but many times the potency is weakened down significantly. Grow your own Salvia divinorum with the guide provided below.

How To Grow A Salvia Divinorum From Cuttings

Most people grow their Salvia divinorum from cuttings they purchase online. This method works extremely well and in fact works better than other methods. If you follow the steps below, you will end up with a healthy salvia plant.

First Step – involves removing the cuttings from the shipping package. Most suppliers utilize special packaging and gel to protect its cuttings during shipping. If the cuttings are not packaged correctly, they may dry out and be rendered useless. When you receive your cuttings, carefully remove them from the glass tube they are stored in. Some suppliers will utilize a protective tube with a lid, while others will not. If the tube has a lid, you can cut the adhesive tape to access the cuttings. Once you have the cuttings in hand, place them in a safe location.

Second Step – involves hydrating the cuttings. Just mist the cuttings with cold tap water to hydrate them. Lukewarm tap water will also work, if you do not have access to cold water.

Third Step – involves rinsing off the gel. Place the Salvia divinorum cuttings underneath the tap. Adjust the water temperature to cold or lukewarm. Gently rinse the roots until all of the gel is thoroughly washed away.

Fourth Step – involves removing dead leaves and those located just below the soil level. It is not unusual to receive a plant with dead or darkened leaves. These will need to be removed, but pinching or snipping the end of the stem away.

Fifth Step – involves preparing your pot. Just about any type of flowerpot with a drainage hole will do, as long as it is small and durable. Experts recommend only utilizing soil that you can purchase from a big box store or garden center. Outdoor soil has shown to contain insects that will eat the leaves and stems of the Salvia plant, eventually killing it. Fill your flowerpot about two-thirds full of store-bought potting soil.

Sixth Step – involves the transplanting process. Utilize your finger to make a hole in the center of the soil. Make sure the hole is at least two inches in depth.

Seventh Step – involves moistening the soil. Do not drench the soil with a lot of water. Instead utilize a mist of water to moisten the soil.

Eighth Step – involves securing the Salvia plant in the pot. This process requires a rubber band, as well as a clear plastic bag. Cover the plant from the top to the edge of the soil with the bag and then place the rubber band around the bag. Do this in a manner that secures the plant to the base of the flowerpot. The idea is to not restrict the plant in any way, because you want it to be able to receive water and grow.

Ninth Step – involves finding a suitable location for your Salvia plant. Salvia plants are favorable to filtered sunlight. Avoid direct sunlight and shady areas at all cost.

Tenth Step – involves acclimating the Salvia plant to the natural level humidity. The plant should be left in the plastic bag for at least seven days. The next two weeks will involve acclimating it to the amount of humidity in the environment. You can do this by cutting or punching several holes in the plastic bag daily.

Eleventh Step – involves removing the Salvia plant completely from its plastic bag. Strip the plastic bag away.

Twelfth Step – involves transplanting the plant to a larger pot. Prepare a fresh pot, fill it with store-bought soil and water.

salvias

Appropriate Weather Conditions

In order to grow salvia, you’re going to need to perfectly replicate the plant’s natural habitat. This means that you’ll need the appropriate temperatures and the right amount of lighting. If you happen to reside in a climate that freezes, you’re probably going to have a tough time growing the plant outside.

The plant requires a humid environment with temperatures between 45 and 70 degrees. It is a very fragile and delicate plant. If you’re not careful, you’ll break it without even realizing it.

If it drops below 40 degrees in your area, you’re going to want to bring the plant inside overnight. Otherwise it is going to die. You’ll also need to keep a close eye on the plant’s moisture. If the leaves start drooping, you’re going to need to add more water as quickly as possible. If the plant becomes severely limp, it is probably going to do. Keeping your plant in the bathroom while you’re showering can help give it plenty of humidity and ensure that the plant thrives.

How To Properly Maintenance Your Salvia Plant

Whether you are familiar with Salvia plants or this is your first one, these is a good chance that you know maintenance is essential to the survival of any plant. Not only will proper maintenance ensure that your plants last as long as they should, but it will ensure that you get the biggest yield possible.

So, how exactly can you ensure that that your Salvia plants is getting the best care possible? The first and most important thing to consider when it comes to Salvia care is the watering process.

You must always water your plant when the soil feels like it is drying out. You will either notice this by placing your fingers in the soil of paying close attention to the leaves. When water it denied the leaves of the plant will begin to wilt, which can be a good indication of dehydration. The soil will also be less saturated when placing your fingers inside.

salvia divinorum plantAlso, your plants need to be placed in a climate that they are familiar with in order to thrive. Since Salvia plants are used to bright, warm climates, they are going to only thrive in direct sunlight. When you combine this with their extremely high growth rates, you need to consider the location in which you are growing the plants.

 

Salvia plants possess the ability to grow up to eight feet tall, which can be extremely high. If you are growing in locations where height is restricted, you might want to consider trimming the tops. When you trim the tops it literally forces to the plant to bush and grow in an outward motion. While this is extremely handy in non-spacious limited locations, it can cause potential damage to the overall growth process of the plant.

While many individuals prefer to grow the Salvia plant indoors, it does help to take the plant outside on warm and rainy days. This will allow the rainwater to cleanse the pot and prevent mineral buildup.

If you want to keep your plant healthy and growing like it should, you need to keep the plant healthy with fertilizer and recommended plant feed. While proper feeding is essential to the overall growth and yield, you want to ensure that you are not overfeeding the plant, as it could cause mineral buildup. This buildup could potentially result in the overall destruction of your plant.

Slugs and aphids are not uncommon when it comes to growing any type of plant. Considering the fact that you want to utilize this plant for personal uses, you do not want to ingest any harmful toxins in the process. There are a variety of different of practices that you can partake in to prevent insects from growing on your plants. One of the most popular is placing a bowl of beer near the plant. Since beer contains a lot of salt it can detour slugs or subsequently cause them to drown in the substance.

The Cuttings From You Salvia Plant

When you are cutting your Salvia plant it is imperative to utilize clean and sanitized blades. In addition to this, you want to cut the stem just below the node, as this is the location in which the roots will first develop. When you make this cut, you need to ensure that the cut remains fresh until the plant is transplanted into the new soil or location. If you don’t follow these direct procedures it is potentially possible that your plant might not survive.

When you are making fresh cuts, you also need to make sure that there aren’t roots exposed. You can accomplish this by covering the cutting with a special root powder or gel exactly one-inch before you made the cut. This will not only stimulate the root growth of the plant when you transplant it, but it will ensure that the cutting of the plant was exactly made, as it needed to be.